Your pool now has a butler

Five controls. One butler.

Lutra Pool brings pump, heating, pool cover, water treatment, counter-current and lighting together under one dedicated controller and one app. Fully bespoke, in your own colours. Controlled from your smartphone, your smartwatch, the browser or by voice.

The Lutra Pool otter in sunglasses and bow tie

Good afternoon. The water is 27.2 degrees. Shall I open the cover?

Five brands. Five apps. Five remotes.

Every device works, but each in its own way. The heat pump has its own app, the filter pump a panel in the plant room, and the lighting remote is rarely where you left it. Flip the switch and see how it could be.

Heat pumpown app, own login
Filter pumppanel in the plant room
Chlorine and pHdisplay, three buttons
Pool coverkey switch
Lightingremote, missing

One app. All in hand.

One log and one overview of every notification.

What the butler handles for you.

We connect your existing equipment. Whatever is missing, we choose together with you.

Filter pump

Runs to schedule at the right speed. Powerful when needed, almost silent the rest of the time.

Heating and heat pump

Warm when you wish to swim. Economical while you are away.

Backwashing

The filter is cleaned automatically, without you having to turn a single valve.

Pool cover

Opens with one tap, but only once the controller has confirmed it is safe to do so.

pH, chlorine and salt

Measured continuously and adjusted automatically. The water stays in balance.

Water level

Tops up automatically and warns you when the level drops faster than usual.

Counter-current

Ten minutes of lengths, with the strength on a slider.

Lighting

Evening ambience with a single command, in tune with the rest of the house.

The app

Your pool, sir. On one screen.

Every tap is exactly one command. Before it is carried out, the controller checks that all conditions are safe, and nothing is repeated unasked. Please, do try it.

On your smartwatch too: temperature, notifications and the pool cover on your wrist.

Lutra Pool

2 alerts

Good afternoon. Two alerts.

Probe current raised

Chlorine production stopped

Water

27,2°

outside
12.5 °C

Pump running

35% · 58 W

Pool cover

closed

UV

on

Light

off

Charts · 24 hours

Water temperature

27,2°

Free chlorine

0,46

ORP

709 mV

Controls

Pool cover

closed
OpenClose

Counter-current

off

10 min onOff

Strength

90%

Lighting

On

Pump schedule

Now: day window, 35%

06121824

yellow: day window 35% · aqua: outside window 30%

Day window

10:3016:4535%

Outside window: on / off / %

2 h1 h30%
Save schedule

Sir, the water is 27.2 degrees.

Cover open

Bespoke

Your pool. Your colours. Even your name.

The app takes on the colours that suit your home and your taste. Prefer a brand entirely your own? With white label, the app carries your name and your logo, on our technology.

Every installation is fully bespoke: we connect the pool control and supporting systems already in place, or the ones you would like.

Pool builder or installer? Offer Lutra Pool as a ready-made platform under your own name. We take care of the technology and the software, you keep the client relationship.

Lutra Pool

Water

27,2°

Cover open

Butler

Villa Duin

Water

27,2°

Cover open

Own colours

Your brand

Water

27,2°

Cover open

White label

Dedicated controller

Runs at home. Not in the cloud.

Lutra Pool runs on a dedicated controller in your home network. You control everything over your own Wi-Fi: directly, without a detour via external servers, and your data stays in the house. The system only goes online if you wish it to.

Lutra controller

in the plant room, connected to pump, valves and sensors

Smartphone

Smartwatch

Browser

Internet: off. Unless you switch it on.

All in hand. Even when you are away.

On its own

Pump schedule, heating, dosing and backwashing run quietly in the background. You only hear about it when there is something to hear.

By voice

"Get the pool ready for Saturday."

Very good. The heat pump is on and the cover will open on Saturday at ten.

Through the voice assistant you already use.

He keeps watch

The AI analysis keeps an eye on water, energy and equipment. A few examples of alerts:

pH pump is dosing more often than usual

Heat pump needs more time per degree

Pump is drawing more power: check the filter

Water level falling faster than evaporation explains

A day with the butler

You swim. The butler minds the clock.

This is an ordinary day at our reference pool. Your own schedule we set up together with you.

00:00

Night rhythm

Outside the day window the pump runs in blocks: two hours on at 30%, one hour off.

10:30

Day window

The pump moves to 35% for the hours when people swim.

13:00

"Cover open, please."

One tap on your smartwatch. The controller first checks that all is safe, then the cover opens.

16:45

Back to calm

The day window closes and the pump returns to its night rhythm.

24/7

Measure and report

Temperature, pH, free chlorine and ORP are measured continuously. Should chlorine production stop, you know at once.

Works with what you have.

If a device has a connection, we can integrate it. Pool control, cover, water treatment, heat pump and counter-current from the major brands, your home automation and the equipment you already own. Every integration is bespoke.

KNX Apple Home Home Assistant Modbus DALI DMX AstralPool Elite Connect Aquagem EvaOptic Evastream and what you already have

We connect. You swim.

New build or existing pool: we work with what is there and add to it where you wish.

1

Survey

What is there, what would you like, and how do you use the pool? We design the integration around that.

2

Tailor

Integrations, schedules and the app in your colours, or under your own brand.

3

Install

Our controller in the plant room, on your own network. We take care of cabling, sensors and calibration.

4

Connect

KNX, DALI, DMX, Apple Home, Home Assistant, Modbus and your voice assistant.

5

Without a care

No maintenance contract needed. Updates and 24/7 support run through the AI help link in your app, and only when you switch it on.

Reference pool

First in our own pool.

Our own pool in Santpoort-Zuid is the Lutra Pool reference pool. Every feature and every update runs there extensively in practice first, before it is installed at your home.

[RENDER]
The pool
[RENDER]
The app
[RENDER]
Plant room
[RENDER]
The controller

Questions for the butler.

Is your question not listed? Do feel free to ask it during the introduction.

Do I need a new pool?

No. We connect what is there, in new builds and existing pools alike. What works well, we leave in place.

Does it work without internet?

Yes. The controller runs in your home network and is reached over your own Wi-Fi. The system only goes online if you wish it to.

Can the app match our house style?

Yes. We tune the app's colours to your preference. White label is possible too: the app under your own name and logo.

Will it work with my equipment?

Every installation is bespoke, tailored to what is there or what you would like. Brands we already connect: AstralPool Elite Connect, Aquagem, EvaOptic and Evastream. If your brand is not listed, we will look into the possibilities.

Do I need technical knowledge?

No. The pool runs to schedule, doses itself and lets you know when something needs attention. The app is there for when you want to look in or adjust something.

What does it cost?

Every installation is bespoke, so the price depends on what is there and what you would like. After an introduction on site you receive a clear quotation, with no surprises afterwards.

Shall we meet?

Tell us briefly what you have or what you are building. We will gladly visit you, or you are welcome at our reference pool in Santpoort-Zuid. The coffee will be ready.

06 83 49 53 21 · lutra@neurendal.com · We reply within one working day.

I shall put the coffee on.

What would you like to discuss?
Arrange an introduction